EMC GTEM CELL 500
For Radiated Immunity & Emissions Testing
Frequency Range: 100 kHz to 20 GHz
Max power-input: 250 W
Input connector type N (Female)
Nominal impendance: 50 Ohm
Typical VSWR: 1:1.2
Power line filter: 2x 230V AC/DC 16A
RF coax Feed-thru(s): 1x SMA + 1x N (Females)
Other Feed-thru(s): 1x Fiber optical cable
Dimensions: 245(L) x 140(W) x 93(H) cm
Septum Height: 500 mm
Door Size: 40(W) x 40(H) cm
Uniform Area Size ±3dB: 20(L) x 20(W) x 15(H) cm
EUT Max Size: 40(L) x 40(W) x 30(H) cm
Weight: 150 Kg
INOX; PLF-16S; FOPT-3; FT-N; FT-SMA;
IEC/EN 61000-4-3 - IEC/EN 61000-4-20
Emctest Technologies - Via Marecchiese 273 - 47922 Rimini - ITALY
Web: www.emctest.it - www.buygtem.com / Tel.: +39 0541728562
GTEM TEST CELL : EMC GTEM 500
IntroductionThe GTEM cell is a TEM waveguide with the upper frequency limit extended to the GHz range.
It is under consideration as an alternative measurement facility for both radiated emission and immunity measurements.
It is included in the recently published standard IEC 61000-4-20 “Emission and Immunity Testing in Transverse Electromagnetic (TEM) Waveguides”.
Theory of operations
GTEM-cells (Giga-hertz Transversal Electro-Magnetic cells) are waveguide structures intended for electromagnetic compatibility measurements, as well as biomedical applications.
The electromagnetic field distribution inside the cell is in TEM mode. With TEM mode propagation, there is no component of electric and magnetic field in the direction of propagation of electromagnetic wave.
Therefore the field components are strictly perpendicular. Assuming the field distribution ideal TEM below the cut-off frequency of the cell (before the introduction of higher order modes), the electromagnetic field distribution can be considered static.
Engineered and completely manufactured in Italy.
Ruggedized fully INOX steel construction
Unique compact design.
Optimized for EMI and EMC.
Strong fields achieved with low input power
Broadband up to 20Ghz
High effective shielding
Fully customizable feed thrus and filters
Excellent quality at Low cost
EMI and EMS devices
Radiation and susceptibility test
Specifically designed for telecom application
Biomedical and dosimetrical applications
Isotropic sensors calibration
Receiver sensitivity test